 Starlight Xpress Accessories |
 |
Last updated: 2007 April 14The following accessories are available:
|
| SXV AutoGuider This mini-cam autoguider (has the same chip as the MX5, but is uncooled) plugs into the back of any SXV series camera -- for super simple setup! Has C-mount threads in front.
|
 |
| Cables (Parallel Port)
10 and 15 metre lengths are available for that extra reach. Replacement cables for the standard 5 metre length are also available. Note: 10 metres is the maximum recommended length for Fast Interface users. 10 metre: CDN $95.00 15 metre: CDN $105.00 |
 |
| Fastar Camera Adaptor This adaptor allows Starlight cameras to be mated with the Celestron Fastar line of telescopes.
|
 |
| 26mm Extension Tube The 26mm extension tube is sometimes required to allow Starlight cameras to reach focus when used with 35mm SLR camera lenses.
|
 |
| STAR2000 Interface Kit Guide automatically on almost any star in the image field, - without off-axis autoguiders, extra guide scopes, or lost field of view! S.T.A.R. 2000 will even guide on moving objects, such as comets! For use with MX series cameras (not HX series). See also the STAR2000 Relay Box and SkySensor Adaptor.
|
 |
| Relay Box for STAR2000 The relay box allows STAR2000 to be used with the telescope mounts requiring a relay interface. Requires one 9V battery (not included).
|
 |
| SkySensor Adaptor for STAR2000 This adaptor allows STAR2000 to be used with telescope mounts employing the Vixen SkySensor system. Simply plug in between the STAR2000 interface box and your SkySensor mount.
|
 |
| Autoguider Interface Kit The Autoguider Interface is intended for use with 'ST4 capable' telescope mounts and permits the software to communicate with the drive via the computer serial port. Connect it between your computer's COM1: or COM2: port, and the 'Autoguider Input' of your 'scope. LED lamps indicate drive control activity. Comes complete with all cables - no extra equipment needed. LX200 users do NOT require this interface. Works with all MX and HX series cameras.
|
 |
| USB2 Interface Kit |
 |
|
USB2 Interface Kit Compatible with MX516, MX5C, MX716, MX7C, and MX916. Includes interface box and cables (does not include camera, guider, or power supply as shown above). The camera output socket in this interface can be used for STAR2000 guiding (M series cameras only!), so long as it is fed to the 'autoguider' input of the mount. (Guiding via RS232 is already 'dongle free'.)
|
Back to top